Handy Halter Skadis beweglich / Mobile phone holder Skadis movable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handy Halter Skadis mit schwenkbarem halter
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
🇩🇪 Deutsch
Schwenkbarer und flexibler Handyhalter für das IKEA Skådis Lochwandsystem
Dieser praktische Handyhalter lässt sich dank des mehrteiligen Gelenkarms flexibel in Reichweite und Winkel verstellen. Perfekt für den Schreibtisch, die Werkstatt oder die Bastelecke, um Benachrichtigungen im Blick zu haben, Videos anzusehen oder Videoanrufe zu führen.
✨ Features
Modular & Schwenkbar: Flexibel ausrichtbar dank 3-Punkt-Gelenkarm.
Sicherer Halt: Passgenau für die originalen IKEA Skådis Lochabstände.
Modernes Design: Schicke Wabenstruktur (Hexagon) an der Rückwand zur Gewichts- und Materialersparnis.
Kabelaussparung: Laden während der Nutzung problemlos möglich.
Einstellbarer Widerstand: Durch selbstsichernde Muttern lässt sich die Leichtgängigkeit der Gelenke perfekt justieren.
🔩 Benötigte Hardware (BOM)
2× M4 × 10 mm Schrauben (z. B. Innensechskant / Zylinderkopf)
2× M4 Standard-Muttern
3× M4 × 30 mm Schrauben
3× M4 Selbstsichernde Muttern (Stoppmuttern / Nyloc)
🖨 Empfohlene Druckeinstellungen
Druckzeit: ca. 3 Stunden (ca. 2h 59m im Normal-Modus)
Materialverbrauch: ca. 60 g Filament
Material: PLA, PETG oder ABS/ASA (PETG empfohlen für extra Zähigkeit der Gelenke)
Schichthöhe (Layer Height): 0.20 mm (z. B. 0.20mm Structural)
Infill: 20 %
Perimeter / Wandlinien: 3–4 (für stabile Schraubverbindungen und Gelenke)
Stützen (Supports): Ja, überall (Organische Stützen / Tree Supports empfohlen)
Düse: 0.4 mm
🛠 Montageanleitung
1. Grundhalterung montieren: Die Gelenkbasis mit den 2× M4×10 mm Schrauben und den zwei Standard-Muttern an der Skådis-Hakenplatte verschrauben.
2. Arme verbinden: Die Verlängerungsglieder und die Handyauflage mit den 3× M4×30 mm Schrauben und den selbstsichernden M4-Muttern zusammenfügen.
3. Widerstand einstellen: Die selbstsichernden Muttern so fest anziehen, dass sich die Gelenke stramm bewegen lassen, das Handy das Gewicht aber sicher hält ohne abzusinken.
4. In das Skådis-Board einhängen und fertig!
🇬🇧 English
Articulated & Swivel Smartphone Holder for IKEA Skådis Pegboard
A fully adjustable, multi-joint phone mount tailored specifically for the IKEA Skådis pegboard system. Perfect for keeping your phone visible on your desk, workbench, or craft station for tutorials, calls, or notifications.
✨ Features
Full Articulation: Multi-joint design to easily adjust distance and viewing angle.
Solid Skådis Fit: Secure mounting directly into the Skådis pegboard slots.
Modern Hexagon Pattern: Stylish honeycomb backplate for reduced weight and great looks.
Charging Port Cutout: Easy access to plug in your charging cable.
Adjustable Friction: Tighten the lock nuts to get the exact pivot stiffness you prefer.
🔩 Required Hardware (BOM)
2× M4 × 10 mm socket head cap screws
2× M4 standard nuts
3× M4 × 30 mm socket head cap screws
3× M4 lock nuts (Nyloc)
🖨 Print Settings
Print Time: ~3 hours (~2h 59m)
Filament Usage: ~60 g
Material: PLA, PETG, or ABS/ASA (PETG recommended for higher joint durability)
Layer Height: 0.20 mm (Structural / Quality)
Infill: 20%
Perimeters / Walls: 3–4 walls for strong joints
Supports: Yes (Organic / Tree supports recommended)
Nozzle: 0.4 mm
🛠 Assembly Instructions
1. Base Assembly: Attach the joint mount to the Skådis hook plate using the 2× M4×10 mm screws and standard M4 nuts.
2. Arm & Cradle Assembly: Connect the articulated arm links and the phone cradle using the 3× M4×30 mmscrews and the 3 M4 lock nuts.
3. Tension Adjustment: Tighten the lock nuts until the joints have enough friction to hold the phone firmly in place while remaining movable.
4. Hook it onto your Skådis board and enjoy!
Happy Printing