PINGEQUA SCOUT Lite Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the PINGEQUA Scout Lite board.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The case requires 4 M2 screws. I was using what I had at hand, which were M2x8. The holes do not need to be threaded. You should be able to just thread them in. Longer screws can be used. but I wouldn't recommend shorter ones.
The Print in the pictures was printed using:
PETG-CF (because it looks cool)
0.2mm Layer height
3 Perimeters
Concentric infill on bottom layer
on CORE One Satin Powder-coated Print Sheet
and supports in the screw head holes
The Case is not compatible with the Flipper's Silicone case, since the Board itself does not support silicone cases.
I haven't yet tried it bout if you have some 1mm light guides laying around, insert them into the LED holes. They should be a lot easier to see.