PINGEQUA SCOUT Lite Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the PINGEQUA Scout Lite board.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 1
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The case requires 4 M2 screws. I was using what I had at hand, which were M2x8. The holes do not need to be threaded. You should be able to just thread them in. Longer screws can be used. but I wouldn't recommend shorter ones.
The Print in the pictures was printed using:
PETG-CF (because it looks cool)
0.2mm Layer height
3 Perimeters
Concentric infill on bottom layer
on CORE One Satin Powder-coated Print Sheet
and supports in the screw head holes
The Case is not compatible with the Flipper's Silicone case, since the Board itself does not support silicone cases.
I haven't yet tried it bout if you have some 1mm light guides laying around, insert them into the LED holes. They should be a lot easier to see.