1 / 7
Fresnel Theatre Spotlight Studio Lamp Holder with Adjustable Stand — zdjęcie 1
1 / 7

Fresnel Theatre Spotlight Studio Lamp Holder with Adjustable Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A theatre/film-style spotlight lamp holder, inspired by classic Fresnel studio lights. Ideal for ambient or backround.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

----Hardware----
Power Cord 
Lamp (LED recommended, >= 60mm diameter) my setup 
Lamp Socket (currently clamp diameter 13.5mm) my setup
6x: M3x10
4x: M3x35
6x: M3 Heat Set Insert 
1x: M6x20
1x: M6 Nut

----Warning---- 
DO NOT put an high-power lamp in this holder. It WILL melt this holder. I recommend to at least use PETG

This project requires you to work with mains voltage. Make sure that you know what you are doing and DO NOT screw around. Route the power cable carefully so it cannot rub on any edges. This may wear down the insulation over time and expose the conductor

----Description----

This is a lamp holder in the style of old theatre and studio Fresnel spotlights. Think of the lights you see rigged above a stage, with barn doors and an adjustable tilt-and-swivel mount.

I designed this model as ambient or background lighting. It is not a functional work light. I have several of these in my flat. They give a warm, directional glow. They also look good as a display prop, even when switched off.

The holder uses a standard E27 socket. You can use most bulbs that fit inside the barn-door opening. I recommend an LED bulb with a diameter of 60 mm or less. See my setup in the hardware list below.

Note: Some pictures might show an older version compared to the uploaded files. Only minor changes were made.

Tagi