CoreOne GEN2 INDX side panel nut helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple tool to place nut inside during side panel instalation/disassembly on CORE One
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 97
- Wydruki
- 5
- Wyświetlenia
- 432
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
Nut aligment tool in package for INDX Founders edition isn't too handy for me. I made my own tool for easy find the position of screw in behind during assembly/disassembly of side panels.
Note: to ensure that nut not fall down you must to press it to the tool
Note2: I did this week upgrade for my friend on his printer with this tool. It is possible to use it on all steps requires handling with nuts during disassembly and upgrade again. But remember, if you tear it down, nuts start slipping. If you print it, print it just for sure 2x.
Note3: I did this week GEN2 update and the tool was handy during removing side panels and attaching them back.
Recommend material: PETG
Recommended settings: 3 perimeters and 20% cubic infill