1 / 2
Cooler Master Elite 130 80mm fan bracket for NF-A8x25 — zdjęcie 1
1 / 2

Cooler Master Elite 130 80mm fan bracket for NF-A8x25

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A compact custom rear fan bracket that accommodate a full sized 80mmx25mm case fan; replaces the stock slim fan bracket.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Want to put a full-thickness 80mm case fan in your Cooler Master Elite 130 case but only have the stock metal Slim Fan bracket on hand?  This print will let you fit the fan below an full-sized ATX power supply and place if further rear-ward than the stock bracket. 

The model is printed in two pieces that are secured together via a long screw from the bottom mounting point and all mounting points are pre-prepared for standard #6-32UNC machine screws that are commonly as as case PC screws.  You may not even find the vertical bracket useful

Note:  due to the space constraints between the Motherboard and the side of the case, the print is designed to capture the fan from between the corner flanges (rather than from the outside of the fan frame) and may not work with all 80mm fan designs, but is specifically made for the Noctua NF-A8x25.

Tagi