Magnetic Hive Tool Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic clip that slides onto your belt, pocket, or bee suit to give you an extra hand holding your tools!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep your hive tool handy while working your hives. This belt clip securely holds a steel hive tool using embedded internal magnets, giving you a quick, hands-free storage spot on your belt or pocket during inspections.
Hardware Required
N52 Magnets: 4x Neodymium Magnets (Amazon)
Print Settings & Pause Instructions
Layer Height: 0.15 mm
Infill: 100% Infill
Filament: PETG or PLA (PETG recommended for flexibility in the clip and heat resistance outdoors)
Embedded Magnets (Pause Print):
Add a print pause at approximately Z = 27.18 mm (approx. 1.07 in height).
Insert the 4 magnets into the internal cavities before resuming the print to seal them permanently inside.
Tip: Ensure the magnet polarities are oriented correctly before resuming, and double-check that they sit completely flush in their slots so the nozzle doesn't hit them.
Make sure to post a Make to earn some free Prusameters!
Happy beekeeping and happy printing!