skadis commandstrip mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket that slots into IKEA Skadis holes so you can hang the pegboard with adhesive strips.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Mount an IKEA Skadis pegboard to the wall without drilling. These brackets slot into the Skadis holes and give you a flat backing surface for adhesive strips, so the board hangs flush and comes off clean. good for rentals, plasterboard, or anywhere you'd rather not put screws.
Print 4 or more depending on board size and how much you plan to hang on it. No supports needed. Clean and degrease the wall before applying the strips, and let them set before loading the board.
Assembly needs 2 small M3 screws per bracket to fasten the knob to the body
Note that adhesive strips have a weight limit, keep this to lighter storage rather than heavy tools.