Mellanox ConnectX-3 Reversed PCI Full Bracket for ADT-Link M.2 Riser Extension Adapter - V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reversed (upside down) PCIE bracket for using the ADT-Link M.2 Riser Extension Adapter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a reversed (upside down) PCIE bracket for using the ADT-Link M.2 Riser Extension Adapter.
The current version is specifically designed for the Mellanox ConnectX-3 10GB NIC card that I needed to connect through my M.2 slot. But can be pretty easily modified/remixed as needed via the TinkerCad link below.
This design allows for the ADT-Link M.2 extension riser to be used much more easily with a nice gentle bend from the M.2 of the motherboard to the outside of the PCIE brackets (not the inside by the motherboard's brackets) by reversing the PCIE bracket mount.
I used this to add a Mellanox ConnectX-3 10Gbe NIC card to my Unraid server after all my PCIE slots were fully utilized by my LSI HDD connection card, NVIDIA GPU card, etc.
I've added all versions that I made:
V1: Original with no lower PCB shield -- was not adequate as I needed to mount to the very bottom PCI slot on my Node 804 case which was uncomfortably close the the metal bottom of the case.
V2: Added a full length PCB shield -- worked perfectly and added more support and rigidity.
V3: Tweaked the PCB shield to only be as wide needed for the Mellanox ConnectX-3 NIC card.
Also included a reverse PCIE bracket (remix) that does not include the ADT-Link bracket in case it's helpful for anyone.
It's specifically designed to be used with the ADT-Link model R43SR:
https://www.amazon.com/dp/B07YDH8KW9
TinkerCad Source:
https://www.tinkercad.com/things/gDIOt2weRAo-adt-link-m2-to-pcie-bracket-for-mellanox-connectx-3-nic
Print Settings:
Slicer: OrcaSlicer
Printer: Sovol SV06 Plus (Klipperized)
Filament: SUNLU High Speed PETG (Black)
Layer Height: .2mm
Wall Loops: 4 (for strength)
Top & Bottom Shell Layers: 4 (for strength)
Infill: 25% Gyroid
Supports: Enabled - Snug - Normal
Supports Top & Bottom Z Distance: .28mm
Supports Base Pattern: Rectilinear
Supports Base Pattern Spacing: 2mm
Supports Interface Pattern: Rectilinear
Supports Top Interface Spacing: .25mm
Supports Bottom Interface Spacing: .5mm
Supports Object X/Y distance: .4mm