37 modeli
This bracket allows you to mount a 40mm fan on the heat sink of the Mellanox ConnectX-4 (heat sink size 45x45x11mm). It is designed with the Noctua NF-A4x10 FLX fan in mind, but other 40mm fans might work. The bracket uses the four stock…
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-3. Untested at the moment, but people were asking for it. Uses M3x12 (ideally SHCS) or longer (the screws should go past the heatsink anyway,…
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2. Uses M3x12 SHCS or M3x16 SHCS. Keep in mind that you're (most likely) printing this in thermoplastic. If you pick a filament with a low HDT…
Remixed Citrusper's design for the larger heat sink of the MCX512A-ACAT. Recommend printing in high temp material. Design works great for me, but this was my first design in Fusion 360 so .f3d file is a mess. Thank you, Citruspers! ASIC…
Works for this specific make of the card. I know there are cards with wider gap between the SFP+ ports and those obviously won't work. If you know some way of describing the difference between these cards, please tell me and I'll add it…
Needed to create a baffle for the widely available and inexpensive Dell branded Mellanox ConnectX-4 LX cards that are slightly different in layout than other half height versions I've seen. The card is very secure once the baffle is…
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
Intro Designed to be printed face down. Holes included for airflow. Sturdy connections to card and case provided to ensure minimal risk of breaking during installation. No modifications to case required. Print Settings 0.6mm 10% infill No…
A quick print to make a low profile bracket for the inexpensive Mellanox Connect-X 10 gigabit Ethernet NICs.
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
This model allows to push the air through the heatsink, it's then expelled at the back of the card, cooling the sfp cages in the process. They're barely warm to the touch with this mod.
This is going to be a very niche model. I will be stoked to get one download. On the other hand, it would have saved me at least a dozen hours if I didn't have to make this from scratch, so… enjoy. I'm using this on both CX4 and CX6…
Prints face down, then whilst still warm bend the end to make the “L” shape for a standard bracket. There is a relief in the model that helps with bending to the correct shape.
Rear panel for the Mellanox Connectx-3 Dual QSFP+ infiniband network card (Model Number CX354A). For the thinkcentre tiny family of micro pcs. Has been tested on an m720q, m920q and Thinkstation P40.
Full height bracket for Mellanox ConnectX-2 with SCAD file for modification. Remixed from https://www.thingiverse.com/thing:3164278 I increased the thickness and added some extra ridges and lips to make the bracket much sturdier. I also…
A low profile slot cover for the Mellanox Connectx-3 CX312B. Activity LEDs are visible. Print parameters: Bambulab P1P Extrudr XPETG Matt Black Layer-Height: 0.12mm Infill: 100% Wall-Loops: 6 With support Assembly: 2x M3x6mm screws 2x M3…
Dell Mellanox ConnectX-3 10Gb SFP+ Dual Port CX322A low profile bracket for Lenovo ThinkStation P330 TINY Desktop PC. I printed quite a few available models and was having different problems with them. So, I ended up just creating one…
Citruspers made a good design however I wasn't totally happy with the result. As you can see in his picture, the bracket overhangs from the heatsink and the two claws on the right are in, what I call, a danger zone: SMD components are…
ConnectX card are designed for the high airflow levels in servers and will often overheat when used in a typical desktop machine unless fans are added to directly cool the card. This print provides a cooling shroud that uses a standard…
Made for a 4010 blower style fan. The one i have is 5V which i've connected through a USB cable. Afaik it's also available in 12V variant. I cannot tell you if it fits other 4010 fans like this, but the size does seem standard. The fan…
Printed in PETG. I advise against printing in a temperature-sensitive material like PLA because the card can get quite hot. Huge thanks to David Fish for the original design – I love that this can be printed flat then bent for the 90…
This is a very simple bracket to install single port Mellanox Connectx-3 card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins…
This is a low profile PCIE bracket for the Mellanox ConnectX-4 NIC. It was tested with a HP DL120 Gen 9 server.
A bracket for the Lenovo Tiny computers that is made to fit on the Dell CX4121C Mellanox ConnectX-4 SFP Card. The bracket was printed with the internal part facing down so that the hexagon holes would look a bit cleaner once the supports…
Paied with this fan, with the wider exit https://www.amazon.co.uk/dp/B0BNZH39TJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
This modification just removes part of the top of the bracket so that there is a cooling channel for the air
Mellanox ConnectX-3 dual QSFP+ PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. Use a bit of force to tap the screws.
Printed with PETG with 6 walls and 25% infill Loose fit to heatsink, but works
I am Jack's full-height Mellanox bracket. The card was pulled from some dead server, wiped, and sold on. It arrived with the only bracket it ever knew: the short one. Built for a slot it would never live in again. I made it complete, and…
Collection of brackets for Mellanox Connectx4 brackets QSFP and SFP, low profile and full height
This is a collection low profile brackets for multiple ConnectX cards. They may work on other Connectx cards with similar mounting points and port count. Mount distance is the length between mounting holes. The screws seem to be 4-40. I…
Simple mount fan mount for LR-LINK LRES1054PF-2SFP28. (2x25Gbit Connectx5 NIC)
Cooling fan mount designed specifically for the Mellanox ConnectX-2 MNPA19-XTR network interface card. The mount is built to hold a standard 4010 blower fan (turbofan) Print instructions Print vertically, without supports. Stop printing…
This is a reversed (upside down) PCIE bracket for using the ADT-Link M.2 Riser Extension Adapter. The current version is specifically designed for the Mellanox ConnectX-3 10GB NIC card that I needed to connect through my M.2 slot. But can…
Printed in PETG. I advise against printing in a temperature-sensitive material like PLA because the card can get quite hot. Huge thanks to David Fish for the original design – I love that this can be printed flat then bent for the 90…
This is a collection low profile brackets for multiple ConnectX cards. They may work on other Connectx cards with similar mounting points and port count. Mount distance is the length between mounting holes. The screws seem to be 4-40. I…
