1 / 4
Mellanox ConnectX-2 4010 Fan Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-part cooling shroud for the Mellanox ConnectX-2 MNPA19-XTR network card. Accommodates a 4010 blower fan.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Cooling fan mount designed specifically for the Mellanox ConnectX-2 MNPA19-XTR network interface card. The mount is built to hold a standard 4010 blower fan (turbofan)
Print instructions
Print vertically, without supports. Stop printing before the last layer of the internal bridge, insert the cooler into the part, and let the printer print over the cooler
