Modular tank conveyor belt - 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this modular system you can create your own tank, robotic base, and even a wheelchair for a very small person!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
UPDATE!
This version has a narrower overall system compared to the previous version, but the track has the same width and length. Less bulky. Also, this version is slower, but has more torque. Check the "video" (gif).
(you can check the bulkier version on my profile)
The system is symmetrical on all axes, so you just need to print twice as many parts to have both sides.
Each track has 30 sections.
Materials needed for each side:
2x N20 motors (high torque) - I used two 18650 batteries for power. It won't work with just one battery due to weight and friction. It's for a tank, not a plane.
4x M3 screws
Assembly:
Cut the FILAMENT into pieces approximately 34mm long (bend one end slightly so it holds and doesn't fall off during use). Each section is joined to the next by passing the filament pieces through the hole. Even an American can do it.
For the rest of the body, just look at the photos.