1/4 Scale Federal Signal STH-10 Siren
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully functional and outdoor safe model of a Federal Signal STH-10 siren with many customization options!
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 558
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠(DISCLAIMER)⚠ MY MODELS ARE PUBLISHED UNDER THE CC BY-NC-SA 4.0 LICENSE: https://creativecommons.org/licenses/by-nc-sa/4.0/
You are welcome to download, print, share, and remix all my designs with credit, but you may not sell any of my files, prints, or remixes to make a profit. Please respect the time and effort I put into all of my designs and I will take action against them being sold for profit. Thank you!
My first big Federal Signal siren Printables release in... God knows how long 😭
But, here it is! The STH-10 is here to print for everyone! I had a lot of fun making this and it's a very easy build for you all to do as well. The only annoying thing about it is that it uses a LOT of M2 hardware, so be prepared! It's also very handy to have a 1.5mm alan wrench screwdriver (not electric) for assembly since I couldn't even imagine assembling this thing with a tiny alan wrench.
PARTS LIST:
MOTOR: https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=2258574 (Or Amazon link: https://www.amazon.com/Nichibo-Taiwan-HP5FN-5515S-R-Motor-Diameter/dp/B06W9LTKKS/ref)
SHAFT COUPLER(S): https://www.amazon.com/12Pcs-3-17mm-Coupling-Connector-Airplane/dp/B0DKT5T64L/ref
https://www.amazon.com/12Pcs-3-17mm-Coupling-Connector-Airplane/dp/B0DKT5T64L/ref
M3 HARDWARE KIT: https://www.amazon.com/Machine-Assorted-Assortment-Stainless-Threaded/dp/B0DFWYBJJJ/
M3 THREADED INSERTS: https://www.amazon.com/dp/B08BCRZZS3?ref
M2 HARDWARE KIT: https://www.amazon.com/Machine-Assorted-Stainless-Assortment-Threaded/dp/B0DFWXRM21/ref
M2 THREADED INSERTS: https://www.amazon.com/ruthex-Threaded-Insert-pieces-ultrasound/dp/B088QJG676/ref
ASSEMBLY:
The assembly of the STH is quite simple (as I said earlier)
First off, print your stator and whatever motor cover body you choose! The motor cover body should have four holes on each side for M2 inserts and M3 inserts. Sink four M3 threaded inserts into the bigger holes and now you can bolt the motor cover to the stator with the extra four holes that are in the stator floor with M3! We can save the M2 insert part for later but if you want to get those inserts in right now, go for it!

(This image shows where your M3 bolts should thread up into the motor cover)
Alrighty! now that your stator and motor cover are one, you can get the rotor printed and hammer a shaft coupler into the bottom. It should be toleranced to need a hammer to tap itself in but if yours is pretty loose, put a small line of super glue inside the hole (on either side OPPOSITE of the setscrew holes as to not get glue inside) And speaking of the setscrew holes, make sure that the coupler's holes are aligned with the small holes inside of the rotor.

(This image shows the alignment of my coupler inside of the rotor)
Now you can put the core together! Take your long alan wrench and put two setscrews into both sides of the shaft coupler in the center of the rotor. Now, slip the rotor onto the motor shaft! It should slide on super easily and once you have it aligned with the stator ports, tighten the setscrews down. If you're having scraping, try adjusting the position of the setscrews on the shaft! It doesn't sound like much but I've had that fix a lot of rotor wobble before. You can also give the siren a full power test now to make sure it's all working okay.

(Fully assembled core)
The next thing I'd do is print the stand. That's all pretty self explanatory but it's all held together with small M2 hardware and you NEED to use needle nose pliers to grasp the nuts on the end of the bolts in order to REALLLLY tighten down those bolts otherwise they may come loose! Start with bolting each leg to the intake (which you should print now if you haven't already). Reason you need to do it this way is because if you assemble the stand, getting your pliers and hardware into their proper positions with the stand center and everything would be a nightmare. But once you have all three legs bolted, bolt the stand center to the middle. If you're going to mount the siren to a pole, you don't need to do anything else from here. Just screw the legs onto a pole with random screws around, although you may need to drill out the holes more! If you're just doing the normal stand, you can print the bottom frame and bolt it to the legs.


Now if you haven't already, you can bolt the intake to the top of the stator. You'll need to sink 6 M2 inserts into the top of the stator where the bigger holes are. Once you get those in, simply just screw the two pieces together!
From here on, it's really just the horns and then the rest of the motor cover. For the horns, you'll want to thread two smaller M2 bolts into the small holes on the top and bottom of the stator until they barely push out the bottom. If support material left lines and such going through the holes, just scrape them out with an x-acto. Once you have them threaded, push in a horn and tighten them all the way in. The horn should be held nice and securely!


Once you have them all in, you can add the horn spacers! This is a step you don't really need to do but it does add to the stability and the realism of the siren a LOT. The spacers go between each horn at the front and secure with two M2x4 bolts on either side. You'll need to grasp the spacers with pliers as you thread the first and possibly second bolt in so it doesn't just rotate with the bolt rotation. Once you get those in, it should look like this!


All you need to do now is wire the siren and finish the motor cover. If you haven't already, solder wires to the motor terminals and push them out of whatever hole(s) come out of your motor cover. For the marathon (since that's the only one there is right now) you then just need to secure the top endbell with M2 bolts into the M2 inserts on the top of the motor body that I mentioned a while ago. Finally, screw on the junction box cover to the side of the motor and you're STH-10 is complete!!
