1 / 4
VIRTU E3 - V-ION Toolhead remix (HGX Lite + CPAP) — zdjęcie 1
1 / 4

VIRTU E3 - V-ION Toolhead remix (HGX Lite + CPAP)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

V-ION Toolhead for the Voron 2.4, built around the Goliath hotend, with an HGX Lite extruder and the CPAP cooling varian

Ocena
0 / 5
Polubienia
6
Pobrania
14
Wydruki
0
Wyświetlenia
259
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

V-ION Toolhead for a Voron 2.4, in the Goliath configuration — the hotend this build is designed around — with an HGX Lite extruder and the CPAP part-cooling variant.

Setup — Goliath hotend with 9 mm PTFE, 3010 heatsink fan, HGX Lite extruder (front plate, back plate, idler arm, NEMA14 pancake), CPAP blower for part cooling, MGN12H carriage, Cartographer v3 probe (Beacon RevH also mounts).

Printed — th-base, th-body (Goliath), th-body-fan, th-fanduct, plus the two CPAP bodies.

Hardware — 12× M3×8, 6× M3×16, 1× M3×20, 5× M3×12, 4× M3×6 BHCS, 2× M2×10, 19× M3 heat inserts, MGN12H carriage, 3010 fan, NEMA14 pancake, ECAS04 coupling, one zip tie.

Tagi