MODRA System Panels

MODRA Panels is the core of the MODRA Modular System

Strong snap-lock interface. Print one plate or combine multiple panels to build your own layout.

https://youtube.com/shorts/iR56-dYl0ds?is=GmCDbZcJE5tBMizx

Want to test the MODRA snap-lock system before printing a full panel? Print the test lock and hook here:

Features:

• Integrated snap-lock system

• Clean front surface

• 4 mounting holes

• Designed for direct mounting

• Compatible with all MODRA accessories

Accessories slide in with a light click and stay securely in place. They can be removed by lifting upward with moderate force.

Versions available:

MODRA Panel L – 237×237 mm (5×5 locks)

• Size: 237 × 237 mm

• Weight: ~100 g

• PLA 19%

• PETG 15%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel L Reinforced — 237×237 mm (5×5 locks)

• Size: 237 × 237 mm

• Weight: ~150 g

• PLA 30%

• PETG 35%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel M – 190×190 mm (4×4 locks)

• Size: 190 × 190 mm

• Weight: ~67 g

• PLA 19%

• PETG 15%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel M Reinforced — 190×190 mm (4×4 locks)

• Size: 190 × 190 mm

• Weight: ~100 g

• PLA 30%

• PETG 35%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel S – 143×143 mm (3×3 locks)

• Size: 143 × 143 mm

• Weight: ~40 g

• PLA 19%

• PETG 15%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel S Reinforced — 143×143 mm (3×3 locks)

• Size: 143 × 143 mm

• Weight: ~55 g

• PLA 30%

• PETG 35%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

Each size is available with Custom Background options.

• PLA 19%

• PETG 15%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

⸻

All versions maintain identical external dimensions and full compatibility with all MODRA accessories.

Choose the version depending on your load requirements.

MODRA Segments Additional segments are available to expand your layout or build walls without full panels. Fully compatible with all MODRA Panels.

Mounting guide

1. Start position The first panel must always be installed in the bottom-left corner. This panel becomes the reference for the entire layout.

2. Expansion direction Build the system to the right and upward from the first panel.

3. Panel connection principle Each new panel mechanically locks into the previous one, which additionally presses the installed panel against the wall.

4. Screws requirement Because of this interlocking design, installation is typically possible with two screws per panel, but four screws are recommended.

5. Fasteners selection The exact fastener type and quantity depends on: • wall material • accessory weight • overall system load

6. Recommendation Use appropriate wall anchors when mounting on drywall, brick, or concrete to ensure safe load capacity.