1 / 2
Genie Garage Door Carriage Rail Stabilizer — zdjęcie 1
1 / 2

Genie Garage Door Carriage Rail Stabilizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stabilizer for Genie Garage Door Opener Carriage Rail

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution

I made this because my 18' x 8' steel door, the Genie Accelerator opener with its worm gear, tends to flex the rail in all directions while opening and closing. Even with ideal spring tension on the door, this also makes the door jerk when opening, often causing the door to stop mid-cycle. I designed this model to grab the rail at its midpoint and join it to a wood reinforcement attached to the ceiling. This completely solved the problem and keeps the door opening smoothly with less noise and no stops.

2 prints are needed, as each grabs one side of the rail, and then they fit together like puzzle pieces and attach with wood screws to a wooden support. I printed mine in black PETG with 20% cubic infill, and they are very strong.

Tagi