Bottom cover for BMAX B5A Pro - space for HDD!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom cover for BMAX B5A Pro mini PC that accommodates 2.5 inch HDDs using built in SATA ribbon cable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cover for BMAX mini PC for extending storage
Original bottom cover of B5A Pro mini PC includes designated space for SATA SSD drives, but, at least in my case, 2.5 inch 4TB HDD drive was too big to fit due to limited space between RAM and external ports. This cover increases overall height by approx. 1.5cm, so we can easily squeeze even the biggest 2.5 inch HDDs inside.
Due to limited space inside, I've created 4 holes on walls of the cover, so that we can screw HDD to the bracket. Those holes are approx. 7mm, keep that in mind and use slim screwdrivers.
I did not test factory bolts, instead I opted for:
4x M2x10mm for the cover,
4x HDD screws shipped with my drive (as long as head is below 7mm diameter they will fit), a few mm's long will do