Beelink SER8 Mini PC VESA Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket lets you mount the Beelink SER8 Mini PC under a monitor. It fits any PC measuring 135,5mm x 135,5mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A VESA bracket that gets your Beelink SER8 Mini-PC off the desk and onto a monitor arm. The mini PC sits in an open cradle rather than being clamped or strapped, so it drops in from the top and lifts straight back out — no disassembly when you need to get at it. I used the spare VESA Mount from my monitor arm, which is designed for two displays, as I only use one monitor.
Compatibility
Designed around the Beelink SER8 (135.5 × 135.5 mm footprint).
Any mini PC with the same footprint will fit — several Beelink, Minisforum and comparable models share these dimensions. Measure yours first.
VESA [100 × 100 and 75 × 75] mm hole patterns.
I used PLA, however PETG or ASA might be better suited as this part sits in warm exhaust air and holds the weight. I will test the longevity of PLA.
Please post a make if youve printed one. I'd like to see which other mini PCs fit and I'm happy to adjust the model if a close-but-not-quite case comes up.