1 / 5
AMD BC-250 Blower Cooler — Standard and Fibonacci Designs — zdjęcie 1
1 / 5

AMD BC-250 Blower Cooler — Standard and Fibonacci Designs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

True blower-style cooler for the AMD ASRock BC-250, with standard circular and Fibonacci-inspired versions.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This is a custom blower-style cooling solution designed for the AMD BC-250 board.

Unlike common modifications that place regular axial fans against the flat surface of the heatsink, this design uses the heatsink's internal airflow path. The blower pushes air directly through the heatsink fins, improving heat removal and helping the chip operate at lower temperatures.

Better cooling can contribute to greater stability and improved long-term component reliability, especially during sustained workloads.

TWO DESIGNS INCLUDED

• Standard Circular Design — a clean and simple circular appearance.

• Fibonacci-Inspired Design — a more efficient version inspired by the Fibonacci spiral.

Both versions perform the same function and are compatible with the same blower motor. Choose whichever style you prefer.

REQUIRED COMPONENT

1× blower motor/fan from this listing:

https://pt.aliexpress.com/item/1005010290271850.html

This model was designed around the dimensions of the blower sold in that specific listing. Similar-looking fans may have different dimensions or mounting points, so compatibility with other models is not guaranteed.

WHY USE A BLOWER?

A blower produces concentrated, directional airflow and forces it through the heatsink's internal fins. This makes better use of the original heatsink design than placing conventional fans against its smooth outer surface.

PRINTING RECOMMENDATION

Because the part is installed close to heat-producing components, PETG, ABS, or ASA is recommended. PLA may soften or deform if the surrounding temperature becomes too high.

IMPORTANT NOTES

Check the blower's voltage, polarity, connector, and wiring before powering it. Never assume that two identical-looking connectors use the same pinout.

Cooling performance will vary depending on ambient temperature, case airflow, thermal paste, print quality, and the operating load of the board.

If you build this cooler, please share your make and temperature results. Your feedback may help other AMD BC-250 owners!

LICENSE AND ATTRIBUTION

This work is licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0). You may share, modify, remix, redistribute, and use this design commercially, provided appropriate credit is given to the original creator. If changes are made, please indicate them.

Original design by svenskrauser. Originally published on Thingiverse:

https://www.thingiverse.com/thing:7405071

Tagi