Modular Shelving System for Creality Space Pi & Space Pi Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable, modular shelves for easy desiccant container drying in Creality Space Pi (plus).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Optimize your Creality Space Pi (or Space Pi Plus) filament dryer with this modular shelving system. This design allows you to stack desiccant containers vertically, maximizing the drying capacity of your unit.
By using these shelves, you can dry the desiccant directly inside the containers, eliminating the tedious task of removing and re-inserting silica beads every time you want to dry them.
Key Features:
Modular Design: Easily customize the height and number of layers using the scalable pillars.
Two Aesthetics: Available in both solid and hexagonal (honeycomb) patterns for airflow and style.
Scalable: Pillars can be scaled to any desired length in your slicer to fit your specific needs.
Components Included:
Base Shelf: Designed to sit securely on the rollers of the Space Pi.
Standard Shelf: Modular shelf that mounts onto the base using the pillars.
XL Shelf: A larger format shelf for bigger containers.
Pillars: The structural connectors that define the distance between shelves.
⚠ Important Print Note:
Since these parts will be used inside a heated environment, you must print these using heat-resistant filament such as ABS or ASA. PLA or PETG may deform under the dryer's operating temperature.
Recommended Print Settings:
Material: ABS or ASA
Walls: 3 perimeters
Infill: 10–20%
Supports: Not required
PS the desiccant containers you see are for the Creality CFS and can be found here: