MSI B450M Mortar Replacement I/O Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printable replacement I/O shield for the MSI B450M Mortar motherboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
A 3D-printable replacement I/O shield for the MSI B450M Mortar motherboard.
Designed to replace the original rear I/O shield if it is missing, damaged or lost.
The model is designed to fit the motherboard's rear connectors and the standard PC case I/O opening.
Printing
Layer height: 0.20 mm
2–3 perimeters
15–20% infill
Print flat
No supports required
PLA or PETG recommended
Compatibility
Designed specifically for the MSI B450M Mortar.
Compatibility note: This I/O shield was designed and physically tested on the MSI B450M Mortar.
Based on MSI's official datasheets, the MSI B450M Mortar MAX and MSI B450M Mortar Titanium appear to share the exact same rear I/O port layout (same port types, order, and positions), so this shield should also fit those two boards — however, I have only physically verified it on the standard Mortar. Print and fit at your own discretion if you're using it on the MAX or Titanium variant, and feel free to leave a comment confirming fit if you try it!
If you print it, I'd appreciate a photo of your result and any feedback about the fit.