Nuc5i5ryb 10inch rack mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With and without keystone. Made for i5ryb (board of the nuc5i5ryK and nuc5i5ryH nucs). Supports 2.5 sata ssd.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Made for 10 inch racks. Power button is accessible.
I don't have an original drive caddy or cables, so I cant check if it fits. You may need to make a custom sata power cable. For this refer to official datasheet of this board.
I used M3 plastic screws without any heat inserts or nuts. Printed it vertically with supports for back pegs.
Keystone version is designed for tight fit. I used Vention rj45 coupler as a reference.
I couldn't find any good 3D-printed case or mount for this board. So I made one myself. It's my first time designing a model, so there might be a few imperfection :)