Nuc5i5ryb 10inch rack mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With and without keystone. Made for i5ryb (board of the nuc5i5ryK and nuc5i5ryH nucs). Supports 2.5 sata ssd.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Made for 10 inch racks. Power button is accessible.
I don't have an original drive caddy or cables, so I cant check if it fits. You may need to make a custom sata power cable. For this refer to official datasheet of this board.
I used M3 plastic screws without any heat inserts or nuts. Printed it vertically with supports for back pegs.
Keystone version is designed for tight fit. I used Vention rj45 coupler as a reference.
I couldn't find any good 3D-printed case or mount for this board. So I made one myself. It's my first time designing a model, so there might be a few imperfection :)