MMD KM16 Pro keypad replacement top shell (16 keys, 3 encoders)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement top shell for the MMD KM16 Pro 16-key macro keypad. Reuses the original plastic bottom and electronics.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement top shell for the MMD KM16 Pro keypad (16 keys, three encoders). Reuses the original plastic bottom, electronics and hardware. The decorative badge is omitted.
The original rubber LED diffuser presses directly into the shell, without glue or the metal retaining insert.
Hardware: Eight M2 heat-set inserts, 4 mm long × 3.2 mm outside diameter. The insert holes are Ø3.05 mm.
Printing: Place the visible outer face on the bed. Use targeted supports under the three encoder recesses. The included Bambu A1 PETG 3MF has these supports and an outside brim configured; check the settings for your printer, filament and build plate.
Files: STL for printing, STEP for CAD edits, and 3MF with supports. Use the “With LED diffuser seat - current (rev12)” folder. The rev11 files omit the diffuser seat.