Airframe 12 openGrid Back Panels for Framework Laptop 12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement back panels that mount the Airframe 12 enclosure for the Framework Laptop 12 mainboard on openGrid.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
To show how modular Airframe 12 is, I remixed its back panels so the case attaches to openGrid tiles. You can hang the enclosure on a wall or mount it on an openGrid tool tower.
The panels replace the originals and use the same 6 × M3x6 screws. You also need 2 × Multiconnect snaps to attach them to the tiles.
Use the same print settings as the main Airframe 12 model, but print these panels in PETG. They carry the weight of the case when it's mounted, and PLA can creep under that load over time.
For the full hardware list, print settings and assembly guide, see the main Airframe 12 listing: https://www.printables.com/model/1856301-airframe-12-modular-enclosure-for-framework-laptop
The photos show the enclosure on my Home Assistant wall. I don't own a Framework 12 mainboard yet, so the case is empty for now, but if I get my hands on one, it will likely become my Home Assistant server.