1 / 3
Mounting Bracket for Spirit GeoLink V2 – Spirit GTR — zdjęcie 1
1 / 3

Mounting Bracket for Spirit GeoLink V2 – Spirit GTR

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This holder was designed for helicopters with a 16 mm tail boom diameter

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

This GeoLink holder was designed for a 16 mm tail boom.

You will need:

  • 1× SPIRIT GEOLINK holder

  • 2× GEOLINK counterpart

  • 4× M3 threaded inserts

  • 4× M3×10 socket head cap screws

  • A small piece of thin double-sided tape

Insert the M3 threaded inserts:

Apply a small piece of double-sided tape to all shell halves, including the counterparts. The tape must not be thicker than 0.25 mm.

Mount the holder exactly horizontally at your preferred position on the tail boom and secure the counterparts using four M3×10 socket head cap screws.

Mount your GeoLink on the holder exactly according to the manufacturer's instructions.

Tagi