1 / 4
Core ONE camera corner mount for Aqara G100 — zdjęcie 1
1 / 4

Core ONE camera corner mount for Aqara G100

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Took the corner mount model from Blueskiestailwinds and re-made it to fit an Aqara G100 camera

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Took the corner mount model from Blueskiestailwinds and re-made it to fit an Aqara G100 camera.

The mount is fitted to the frame with 6x2 mm magnets, 2 on each side (there are four holes but i only needed two per side). You may remix the model to any magnet size you may have at home. The original model had 12 mm magnets.

The model can be printed as-is without support with one of the sides flat towards the build plate. The hole for the camera cable should face up. Printed mine in PETG (0.2 mm structural).

Assembly:

  1. Place the magnets into the holes

  2. Remove the existing stand on the camera (one simple screw)

  3. Fit the camera to the mount

  4. Place it upside down (cable facing up) and connect the camera to the Core ONE usb-cord

  5. Install the camera using the Aqara app and go to settings to flip the camera view

  6. All set, enjoy!

*The first image is AI generated/enhanced from second picture. The model is modified using Blender without the use of AI.

Tagi