Liczymy pasujące modele…
This Garmin G1000-like Flight Display is the free V1 version of the FlightSimDIY design, as available on the FlightSimDIY Discord . It includes the complete mechanical design of the G1000 NXI Bezel by FlightSimDIY. Some further upgrades…
A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…
Caps made to fit EC11EBB24C03 dual concentric rotary encoders. https://s.click.aliexpress.com/e/_ApgPhJ
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
A modular 19-inch rack mount for the TP-Link SG1005P. Also works with the TL-SG105. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
Wall mount for a TP-LINK SG1008p network switch allowing it to be slid in and out from the top. Switch will need the sticky feet removed to face the other way from the picture. Needs supports. Print Settings Printer Brand: Creality…
A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…
This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…
Turn your Logitech G305 into the best ergo mouse in history! (which is G703/G603 imo) I made this because the G305 is still the cheapest good wireless gaming mouse in my country. HUGE credit to Rollinsloth's RS4 design;…
This is a 3D printable wall-mount bracket designed specifically for the power supply of the TP-Link PoE Switch model TL-SG1005P. It offers a straightforward solution for mounting the power supply under tables, on walls, or any preferred…
Simple mount to for a Meross MSG100 smart garage door opener. I added a spot on each end so that I could zip tie the cables as a strain relief mechanism.
Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even cable ties. I was originally going to mount on the underside of my desk but after printing figured I could just zip tie it…
This is a support for wall or desktop mount for the TP-link TL-SG1005D, works well and tested on a real router. Printed for test on Creality Sermon V1 PRO, low quality (0,28mm) with supports but might work without supports also (not tested)
better solution for mounting a network hub SG1005 in vertical position
Yet Another MYG100 Riser. Only 90g. Print list: sidePlane.stl ( 2pcs) frontPlane.stl (2 pcs) backCorner.stl (2 pcs, second one need to be mirrored in slicer) frontCorner.stl (2 pcs) frontMiddle.stl (1 pcs)
Wall mount for the Meross MSG100 smart garage door opener. Most 1 1/2 screws should work for mounting. You may need to use a brim to print this.
A 10-inch rack mount for the TP-Link TL-SG1008D V5 switch. Same version as reviewed here: https://www.servethehome.com/tplink-tl-sg1008d-review-unmanaged-8port-gigabit-switch/ This mount comes in two variants, one for the plain switch,…
This is a bracket for the Aqara G100 surveillance camera which can be attached to any window by a double-sided adhesive tape. This specific camera model does not allow for image inversion in its settings, so it needs to be fixed in the…
I recently ran into an issue installing my new WiFi Smart Garage Door Opener. There was no bracket to mount the sensor to the door and my door had a lip on it preventing me from lining it up easily. I made this bracket that the sensor…
Mounting bracket for Meross MSG100 / Refoss RSG100 / Refoss MSG100 smart garage door opener (non-affiliate links). The bracket is designed for Craftsman GDO, but should fit on any Chamberlain/LiftMaster or other GDO with mounting plate on…
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for TP-Link TL-SG1005P This bracket is designed specifically for the TP-Link TL-SG1005P switch, offering a clean and secure fit in your 10-inch rack…
10" Rack Mount for TP-Link TL-SG1005P PoE Switch This mount is designed specifically for the TP-Link TL-SG1005P and fits standard 10-inch racks (1U / 44.5mm height, 250mm width). 🛠 Print & Fit Details: Suitable for print beds 220mm x…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link TL-SG1008P from the ESRack Customizable Device Mount The ESRack system includes the following components: Mounting Brackets - used…
Used very small holes but I tested it for 6 Month and I dont have any Problems with it. Printed in PLA with 0.12 Layer height.
I created this rack mount for TL-SG1005P as a part of my Raspberry Pi Rack. This module fits DAP Audio 2HE rack cover . The insert is mounted with M3 sink head screws. The PSU is held in place by a special clamp (M3x5mm cylinder head…
This is a collet holder for TG100 collets that fits nicely in the drawer of a rolling tool box. It measures 188 mm x 200.5 mm x 35 mm. It is sturdy and holds 25 collets.
I couldn't find a Pokedex case for my phone (the Motorola g100) online anywhere, so I made one from scratch. I made mine with 95A TPU and I feel like there's just enough give to be a pretty protective case. It's got cutouts for both front…
Wall insert to be printed with pause for insert 6xM4 regular nuts
Description Organize all of the parts and cables for your Meross MSG100 into a nice clean enclosure which can be mounted onto the wall. This enclosure has room for the MSG100 and the wireless garage door opener accessory, as well as room…
A 7-inch Rack Mount for the TP-Link SG1005P | SG105(E) | OC200 series. This model is compatible with the GeekPi RackMate TT (Affiliated link). This model is part of a series of 7-inch rack mounts I've designed. You can check out the…
Needed for use: 1/16 rubber sheet or equivalent US penny or equivalent 6/63 grub screws, ¼ inch (ish) for outlet: https://www.amazon.com/gp/product/B0CCNDBD2G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Uses 3x 6/23 screws and nuts…
NemA с редуктором FL57STH56-2804BG100,NemA stepper motor with gearbox FL57STH56-2804BG100, 10:1 straight gear
Background Unlike most ER collet nuts , which have an eccentric ring at the top of the threads, the TG collet nuts I have for my 40 taper tool holders do not have eccentric rings. The only way to remove TG100 collets from the nut for my…
This cap will work with all Pentel PG100x mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip. You…
I recently purchased a tp-link gigabit PoE switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting. The bracket model is one piece, which…
A quick model i made to hold my Tenda TEG1005D on the side of my computer. Just print the 2 parts, glue them after aligning them with the pegs and use some double sided to stick it where you want it. Tolerances are tight so it holds the…
Version 1: 104mm Outer Diameter / 100mm Inner Diameter Version 2 102,5mm Outer Diameter / 101mm Inner Diameter Printed: PLA
Additional feature for big objects, that not fit on table PETG, 100% infill, Layer 0.3 mm
21 Degree support for adjusting Marley RG100 eaves gutter supports. Printed in PETG. No supports needed. Model has small retention hole flanges for keeping the screws in place whilst mounting. UPDATE version 12 has angled holes for…
Shell and lens grid to have a stealth G100 camera filming outside. Adjust the grid to avoid obstructing the infrared LEDs Put an elastic band around the G100 before putting on the shell to hold it in place Paint the shell (for example…
Remixed 2W sled to accomodate TL-SG1005P PoE Switch Update 15 Sep 2023 Added Sled with slot for the provided PSU as well.
HSW holder for deburring tool Nuoda NG1000 with 9 blades. You need an HSW empty insert (Files => Fasteners and parts for attaching hooks and objects => insert-empty.stl). Print settings : Size nozzle : 0.4 Layer Height: 0.2 Infill: 25 %…
MYG100 base legs (will raise your tank by 5 cm). Antislip pads are highly recommended. They also create a secret new space under your tank — ideal for hiding cables, tools, or that random junk you swear you’ll organize later.
The original inlet has wide vertical slits that small shrimp can pass through. This guard clips into the existing slits using four pegs and replaces them with a dense pattern of 1.5 mm rectangular slits. Clips on, no tools.
See image for slicer settings and material. Parts required for mounting onto T-Slot Aluminum Extrusion… M5 x 10mm Hex Countersunk Screws: https://www.amazon.com/iexcell-Thread-Socket-Screws-Finish/dp/B0D77PPKNX/?th=1 T-Nut:…
This is a replacement part for the Meross MSG100 Garage Door Opener. The MSG100 is an odd shape and does not provide any options for mounting, despite being a wired in device, other than double sided tape which might not be ideal. This…
Variants of the parts by Ilyas Sofian. - Lighter baseplate with cutouts - Comfort groove on the mouse clicks. Also 1mm extended for more travel clearance. https://www.printables.com/model/811624-logitech-g1008-mod-g703-shell-g305-pcb
A model designed to mount a desktop switch on the wall and tidy up cable clutter. The original desktop switch – Cisco – measured 140 x 140 x 34 mm. However, it can accommodate a switch measuring 140 x 140 x 37 mm. The model can be screwed…
Introduction Integrates a Sirocco/Jaycar 30mm 5vdc fan into the enclosure of the Meross MSG100. This mod aims to reduce “device not responding” errors which seemed to occur rather frequently during hot summer afternoons in Australia on my…
6-24-2020 POC stage Drawn to allow me to cut a hole to mount a USB charger without cutting up the original piece. requires a little sanding and manipulation to fit square, but its pretty good for the first draft. future versions will have…
Designed by myself in OnShape I hated the look of the blue and gray body of my Noga RG1000 deburring tool, so I took some measurements and printed some new ones in black. Printed on Elegoo Centauri Carbon with a 0.4mm nozzle, using Elegoo…
The ZG1000 has this odd little window on the left side cover. This fills the hole. logo2 is my first draft. it fits, but the 5mm fillets leave a lot of room in the corners logo3 is the final version. the sword handle prints better and the…
Sometimes, positioning the sensors for your Meross MSG100 is difficult. In my case, the magnet was too far from the reed switch. This led to the system thinking the door was always open. I didn't want to mess around with brackets, so I…
A simple plant holder for the Xiaomi MYG100 fish tank to grow emersed plants I removed the original lid/light and hung a Chihiros light above the tank instead. I didn't like the look of the two wide lid-holder hooks left behind, so I…
Xiaomi (Mija) Smart FishTank MYG100 Alien Weed FLOATER Grower perfectly organize floating weed right under the lights. Also it protects roots from being broked by waterfall because it keeps weed off the rollercoaster ) As you see weed…
plaque de lanceur de démarrage de remplacement pour le groupe électrogène G1000 replacement starter starter plate for the G1000 generator set Print Settings Filament: smarrfil petg or ASA Category: Replacement Parts
plaque de lanceur de démarrage de remplacement pour le groupe électrogène G1000 replacement starter starter plate for the G1000 generator set Print Settings Filament: smarrfil petg or ASA Category: Replacement Parts
Didn't have time to order new ones so i made some simple replacements out of TPU-95. These are really tight when printing at 100% infill. These fit a 2004 Land Rover Discovery and should fit a few more. , Part # PCG100330 . To Upper…
This battery powered gluegun have easily acessible button for powering on, thanks to this model no more unwanted powering device in backpack.
You'll find explanations in french on my website : https://labidulerie.vicou.be/support-pistolet-a-colle/ No supports needed if printed in the position showed on the picture
Positioning the door sensor on the Meross MSG100 can be a pain. In my case, without an extender of some kind, the included magnet was too far from the reed switch. I ended up creating a replacement magnet, but that required a lot of…
A holder for the Steinel MobileGlue MG 1007-S cordless glue pen to mount on an IKEA SKÅDIS pegboard. The pen slides in from the top, nozzle down, and wedges itself between the side walls – two quivers on the sides store 4 spare 7 mm glue…
This is a wall mount for the SERCOMM FG1000B.11 fibre-optic modem mainly used by german internet provider 1&1. It also features a little storage compartment for excess fibre cable.
A 7-inch Rack Mount for the TP-Link SG1005P | SG105(E) | OC200 series. This model is compatible with the GeekPi RackMate TT (Affiliated link). This model is part of a series of 7-inch rack mounts I've designed. You can check out the…
Variants of the parts by Ilyas Sofian. - Lighter baseplate with cutouts - Comfort groove on the mouse clicks. Also 1mm extended for more travel clearance. https://www.printables.com/model/811624-logitech-g1008-mod-g703-shell-g305-pcb
Xiaomi (Mija) Smart FishTank MYG100 Alien Weed FLOATER Grower perfectly organize floating weed right under the lights. Also it protects roots from being broked by waterfall because it keeps weed off the rollercoaster ) As you see weed…
Used very small holes. Might be to small. Will find out soon enough. Printed in PLA with 0.12 Layer height.
Shell and lens grid to have a stealth G100 camera filming outside. Adjust the grid to avoid obstructing the infrared LEDs Put an elastic band around the G100 before putting on the shell to hold it in place Paint the shell (for example…
I created this rack mount for TL-SG1005P as a part of my Raspberry Pi Rack. This module fits DAP Audio 2HE rack cover . The insert is mounted with M3 sink head screws. The PSU is held in place by a special clamp (M3x5mm cylinder head…
I have an older tp-link POE switch that is slightly undersized for existing 10" mini-rack mounts I've seen. So I custom-designed a mount that has a slight transition/press fit so that the switch is securely held and does not move when…
Underdesk bracket for TP-Link TL-SG1008-M2 switch. Mirror the bracket for the left side. Printed in PTEG.
Used very small holes. Might be to small. Will find out soon enough. Printed in PLA with 0.12 Layer height.
This bracket allows an Aqara G100 camera to be magnetically attached to a surface, instead of using screws or adhesive. No supports needed to print; if you're going to use it outside, I'd suggest at least PETG. Superglue a couple of…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
considerations before printing Both switch and power supply slots are symmetrical on 2 axes: the devices can be inserted from either end, and facing towards or away from the wall/HSW lattice. In order to choose, consider where you want…
considerations before printing Both switch and power supply slots are symmetrical on 2 axes: the devices can be inserted from either end, and facing towards or away from the wall/HSW lattice. In order to choose, consider where you want…
