AA Holder for Xiaomi Thermometer - Most Compact With Battery Terminals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a AA battery version of the Mijia Xiaomi temperature/humidity sensor LYWSD03MMC housing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
A modified version of the battery holder for the Xiaomi temperature sensor LYWSD03MMC to fit larger batteries. Replaces the CR2032 battery with AA batteries for greatly extended battery life. Uses metal battery terminals which are retained by the case, so some soldering is required. Add the wires as shown in the photos. Just pop the back off the sensor, remove the CR2032 battery and push it into place in the holder. The sensor's original back is left unused. No supports needed when printing.
Features a secure snap-in lid, and a press-fit sensor holder.
The size of the battery terminals is 10 x 9 x 0.3 MM (Length x Width x Thickness). A photo of the terminals used is included in the pictures. These are the ones I used.