Blink 2K+ Camera & Doorbell Siding Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These mounts work with a 4" Clap Board vinyl siding, for a more flush look. (READ DESCRIPTION!!)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
These camera mounts were made to work with a 4" Clapboard Siding. They require no fasteners. I have mounted mine in areas I feel are very protected from high winds. They slide into the already existing seam between two pieces of siding. Feel free to add fastener holes if you feel the need to drill through your siding. I printed in ASA to give the best chance at surviving UV and the elements.
A link below to the geometry used. This site also has other sidings available in the event you don't have a 4" Clapboard Siding like I do. Go ahead, steal the idea, you're going to anyways.
https://www.arcat.com/cad/alside/074600_111e-coventry-d4-clap-board-01-6061.pdf
The two camera mount models are similar with slightly different angles from the mounting wall. I went through a couple iterations to find what I liked for my mounting positions. They are 45° off the wall, and 15° down, as well as 40° off the wall and 15° down. This is pretty easy for me to change, if there is interest I can make some more configurations. If you need it to face the other way just mirror the model, and move the speaker exit.
The doorbell mount DOES require fasteners. I used #8 deck screws to mount this to the wall. I was ok with this as it's something that people are going to be pushing on, and my existing doorbell already had screw holes through the siding. My setup required my doorbell to be mounted on an angle. My angle of choice is 25° off the wall. I like the feel, it's sturdy, it feels like it's going to last a long time. Again I might entertain additional configurations if there's interest.
I still have one more camera to mount. I'll likely do a flush to the wall with downward angle, so a 0° x 15° or 0° x 20°. I'll upload that when I'm done with it. Stay tuned, or don't.