Fluffy Llama Print in Place Flexi Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fluffy llama print in place flexi model with a bobbly fleece, no supports, single colour and AMS profiles included.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This fluffy llama is a print in place flexi model with a bobbly, cloud-like fleece and a very happy little face. It comes off the bed ready to go, with a segmented body that wiggles in your hand, so it works just as well as a desk fidget or a shelf figure. It's a lovely pick for llama and alpaca fans, animal collectors, and anyone after a relaxed, low-fuss print.
Two print profiles are included, a single colour version and an AMS multi-colour version with a contrasting face, ears, feet and eyes. No supports are needed. The profiles are set up with 0.6mm line widths, so it's easiest to use them as they are. Once the print has cooled, give the body a gentle wiggle to free up the segments. If you're new to printing, the single colour version is a great place to start.
Filament Colour & Material
PLA is ideal. For the AMS version, try white for the fleece, a tan or beige for the face and feet, and black for the eyes. For single colour, white or cream looks great.
Print Settings
Print in place: yes
Supports: no
Layer height: 0.16mm
Infill: 15%
Wall line count: 2 or more
Line width: 0.6mm (default, initial layer and outer wall)
Profiles: single colour and AMS multi-colour
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: