DryBox (Food Dehydrator) - No Supports, No additional Hardware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No Supports, No additional Hardware - hole can act as vent, or add a PTFE tube to keep your filament dry when in use.
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 1485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Filament Dryer mod for a standard Food Dehydrator
Recommended settings:
2 walls above
gyroid 10%
preferably with 6mm brim
Preferably use a Cold Grip Plate like the Biqu Glacier plate
No Supports needed
All printable in 1 plate (255mm)
Where I bought mine: https://shopee.ph/product/362888856/26868388474?gads_t_sig=gqRjZGVrxHCFomtpsTE0MjUxOnRzc19zZGtfa2V5omt20QACpGFsZ2_SAAAAZKNkZWvAomN0xEAAAAAMaBRvcqdZwgRklGTWoHoxFGhRfNAexxPkhN1n8rcCO5qFEud_-aY2hsGdfUnqCpX0P0Z7lpJy6IP6_Ew8qmNpcGhlcnRleHTEbgAAAAwph72q5Aih5rR5z7wUmBDOm9wjoq6GXTCBK40VKhVDxf8QVuljAxLt8bXxzaR6KOAW-EbttKb8SDZn7h3M09Wgwh4GRpnpseGaSqaeT-SzKVekIciJIP9dFSqHcSKcefIvtbSZZ24WOxzf (Not affiliated, just for sourcing)