1 / 2
Standard BSPP Threaded Plug (G 1/8" – G 2") / Šestihranná trubková zátka — zdjęcie 1
1 / 2

Standard BSPP Threaded Plug (G 1/8" – G 2") / Šestihranná trubková zátka

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Set of standard double male hexagon pipe threaded plugs modeled according to EN ISO 228-1 (BSPP / G).

Ocena
0 / 5
Polubienia
4
Pobrania
30
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dimensionally accurate set of standard double male hexagon pipe threaded plugs modeled according to European and international standards EN ISO 228-1 (parallel British Standard Pipe thread – BSPP / G) and ISO 4144 (symbol N4 / EN 10241).

Every size is modeled individually from standardized mechanical dimensions, not parametrically scaled. Threads are fully modeled 3D profiles matching real fittings with a 55° thread angle.

Files & Component Breakdown

File Name PNG

English Name

Český název dílu

Wrench Size (SW)

Threaded_Plug_ISO228_G1-8.stl

Threaded Plug G 1/8" BSPP

Šestihranná zátka G 1/8"

12 mm

Threaded_Plug_ISO228_G1-4.stl

Threaded Plug G 1/4" BSPP

Šestihranná zátka G 1/4"

16 mm

Threaded_Plug_ISO228_G3-8.stl

Threaded Plug G 3/8" BSPP

Šestihranná zátka G 3/8"

19 mm

Threaded_Plug_ISO228_G1-2.stl

Threaded Plug G 1/2" BSPP

Šestihranná zátka G 1/2"

24 mm

Threaded_Plug_ISO228_G3-4.stl

Threaded Plug G 3/4" BSPP

Šestihranná zátka  G 3/4"

30 mm

Threaded_Plug_ISO228_G1.stl

Threaded Plug G 1" BSPP

Šestihranná zátka G 1"

36 mm

Threaded_Plug_ISO228_G1_1-4.stl

Threaded Plug G 1 1/4" BSPP

Šestihranná zátka G 1 1/4"

46 mm

Threaded_Plug_ISO228_G1_1-2.stl

Threaded Plug G 1 1/2" BSPP

Šestihranná zátka G 1 1/2"

50 mm

Threaded_Plug_ISO228_G2.stl

Threaded Plug G 2" BSPP

Šestihranná zátka G 2"

64 mm

Print Recommendations

  • Orientation: Print supported standing diagonally on one tip of the threaded end. Optionally, it is easier to print lying on one hex side, but it will compromise thread quality. Use an external brim to prevent tipping during print moves.

  • Layer Height: 0.10 mm to 0.16 mm is recommended to accurately produce thread geometry.

  • Perimeters & Infill: 3–6 perimeters for structural integrity; 50-90% infill for functional testing or plumbing prototypes.

  • Tolerances & Fit: Models reflect nominal ISO dimensions.

  • Heat Fitting for Zero Tolerance Seal: Gently warm the thread surface using a heat gun on low setting (or pre-heat the metal counterpart). You only want to soften the microscopic layer lines, not melt the underlying structure. Screw the fitting in immediately while hot. The pliable outer perimeter forms directly against the metal thread flanks, eliminating layer friction and creating a rock-solid, custom seal as it cools. Apply heat evenly and briefly. Overheating will distort the thread pitch and compromise dimensional accuracy.

Tagi