WhooshDock — Gridfinity Vertical Whoosh Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1x1 Gridfinity stand that holds your Whoosh! 3.4 oz screen cleaner upright and within reach. No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
WhooshDock — Gridfinity 1x1 Vertical Whoosh! 3.4oz Stand
Description
A Gridfinity-compatible stand made specifically for the Whoosh! screen cleaner 3.4 oz (100 ml) bottle. It holds the bottle vertically, so it stands upright on your baseplate instead of lying on its side and taking up space. Four corner posts with curved inner walls are shaped to fit this exact bottle, while the open sides keep the label visible and make it easy to lift the bottle out and put it back.
Features
1x1 Gridfinity-compatible base, slots straight into any Gridfinity baseplate
Made to fit the Whoosh! 3.4 oz (100 ml) screen cleaner bottle
Holds the bottle vertically for a small footprint and easy access
Four curved corner posts keep the bottle securely in place
Open sides for easy grabbing and a clear view of the bottle
Single-part print, no assembly required
No supports needed
Print Instructions
Requirements
Filament: PLA
Support Material: Not required — the model is designed to print cleanly without supports
Printing the Stand
Material: PLA
Supports: None needed
Layer Height: 0.2mm
Infill: 15–20% is sufficient for structural stability
Assembly
This is a single-piece print — simply set the stand onto your Gridfinity baseplate and slide your Whoosh! bottle in.
Did you print it? I'd love to see your setup! Please upload a make and leave a review to help others find this model.