Magic Mushroom Lamp ( ESP32 RGB Touch & Magnetic Watering Effect)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed interactive mushroom lamp with RGB LEDs, touch control, colorful effects, and a magical watering animation.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Bring a little magic to your desk with this interactive 3D-printed mushroom lamp.
This project combines a decorative mushroom design with programmable WS2812B LEDs, touch control, multiple lighting modes, and a magnetic watering effect. The lamp is controlled using an ESP32-C3 SuperMini and includes several interactive features.
With a single touch, you can turn the lamp on or off. A double tap cycles through multiple colors, including 12 fixed colors and a Rainbow mode. Holding the touch sensor activates a smooth breathing-light effect using the currently selected color. The lamp also includes a warm white night-light mode.
One of the most unique features is the magnetic watering effect. When the small watering can containing a magnet is brought close to the Hall sensor, the LEDs illuminate green from the bottom upward through the mushroom stems. When the watering can is moved away, the green light returns downward from the same point.
The mushroom stems can be printed using white or translucent filament to help diffuse the light, while the base and mushroom caps can be printed in any color combination you prefer.
Required Components
ESP32-C3 SuperMini Development Board
https://s.click.aliexpress.com/e/_c2zsPg2d
https://s.click.aliexpress.com/e/_c4lGYIBP30 cm WS2812B 5V Addressable RGB LED Strip
https://s.click.aliexpress.com/e/_c4nDwV7L
https://s.click.aliexpress.com/e/_c39BBKgtTTP223 Capacitive Touch Sensor Module
https://s.click.aliexpress.com/e/_c2vri309
https://s.click.aliexpress.com/e/_c4VnuE9LHall Effect Magnetic Sensor Module
https://s.click.aliexpress.com/e/_c2xgluQN
https://s.click.aliexpress.com/e/_c3WyzcOl3 × 5 × 2 mm Neodymium Magnets
https://s.click.aliexpress.com/e/_c3TcghBT
https://s.click.aliexpress.com/e/_c3NaVZYl
https://s.click.aliexpress.com/e/_c3AWhsKH330 Ω Resistor
https://s.click.aliexpress.com/e/_c30mRkAz
https://s.click.aliexpress.com/e/_c4e9RGkZ
https://s.click.aliexpress.com/e/_c4SqqInf5.5 × 2.1 mm DC Power Jack
https://s.click.aliexpress.com/e/_c4UMUb9x
https://s.click.aliexpress.com/e/_c3XYlctJ5V Power Adapter
https://s.click.aliexpress.com/e/_c4CRkueH
https://s.click.aliexpress.com/e/_c4VrO1bxConnecting wires
https://s.click.aliexpress.com/e/_c4166kPJ
https://s.click.aliexpress.com/e/_c3KhBPrj
https://s.click.aliexpress.com/e/_c4TIEsENHeat-shrink tubing
https://s.click.aliexpress.com/e/_c2ySp7Yt
https://s.click.aliexpress.com/e/_c4rk0ODBHot glue
https://s.click.aliexpress.com/e/_c4mQt6qv
https://s.click.aliexpress.com/e/_c3tqcsIt
https://s.click.aliexpress.com/e/_c3DYifiVWhite or translucent filament for the mushroom stems
Red, white, black, or your preferred filament colors for the caps, base, and watering can
Code
The complete ESP32-C3 program, including touch control, 12 fixed colors, Rainbow mode, breathing-light effect, warm white night-light mode, and the magnetic watering animation, is available at the link below:
Code:
https://bambu3design.com/magic-mushroom-lamp-2/
Assembly Tutorial
You can watch the complete step-by-step assembly and wiring tutorial on my YouTube channel using the link below.
In the video, I show the full build process, including installation of the WS2812B LED strips, wiring of the ESP32-C3 SuperMini, Hall sensor and magnet placement, TTP223 touch sensor setup, uploading the program, final electronics wiring, assembly of the mushroom lamp, and testing all lighting functions and the magnetic watering effect.
Watch the full assembly tutorial on YouTube:
If you print this model, I’d love to see your version.