D-Link DGS-105GL Switch Under-Desk Slide Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide-in under-desk holder for the D-Link DGS-105GL 5-port Gigabit switch. Glue or screw it on, no supports needed.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Under-desk slide mount for the D-Link DGS-105GL 5-port Gigabit switch (metal housing, 100 x 64 x 24 mm).
How it works
C-shaped rail that you stick (3M VHB tape) or screw under your desk.
Slide the switch in from the front, ports facing you: it clicks over two flexible tabs.
Fixed stop at the back, clips at the front: plugging or unplugging RJ45 cables won't move it.
To remove it: push the two tabs down from below and pull.
Open back for the 5V power cable, open bottom and side windows for airflow.
The LEDs are on top of the switch, near the front edge: slide it in upside down to see them from below. The rails stay clear of the RJ45 plugs and the power plug either way.
4 optional 4.5 mm screw holes.
Printing
The STL is already oriented: front face on the bed. No supports needed. A brim is recommended (the part stands 76 mm tall).
PETG, ASA or PLA. 0.2 mm layers, 4 perimeters, 15-20% infill.
Size: 131 x 76 x 31 mm, about 43 g.
Adjusting the fit
Designed for D-Link's spec dimensions (100 x 64 x 24 mm) with 1 mm clearance. If your switch has rubber feet, check its total height. To adjust, edit CH_W / CH_D / CH_H at the top of the included Python script (uses manifold3d + trimesh) and regenerate the STL.
Matching mount for the UGREEN X767 65W charger: https://www.printables.com/model/1867703