[ISO] Metric M1.6~10 wrench handtools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
International Organization for Standardization metric M1.6 trough 10 hand wrenches.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Note: these are ISO Metric Sizes for nuts. A M8 nut isn't 8mm across or point to point, it's the size of the thread it screws onto.
International Organization for Standardization metric M1.6 trough 10 hand wrenches.
With holder.
Their hand tools for threaded parts where the thread is usually longer then most sockets. Such as threaded rods, toilet seats etc.
Sizes:
M1.6, M2, M2.5, M3, M3,5, M4, M5, M6, M8, M10
Contains, Hand tools, and holder
Offsets are 0.2mm for all parts and holder, If your printer isn't calibrated print at a larger % e.g. 101-105%.
No supports required.
If you are looking for spanner sizes where from flat to flat is X mm, otherwise known as spanner sizes see: