Snoozing Capybara Flexi Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleepy flexi capybara fidget, prints in place with no supports. Single colour and AMS profiles included.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This capybara fidget is a chunky, sleepy little flexi that prints in place and is ready to wiggle straight off the bed. The body is split into articulated segments, so it bends and flops about nicely in your hand. It makes a great desk fidget for anyone who likes something calm to fiddle with while they work, and it looks just as good snoozing on a shelf.
There are two print profiles included, one single colour and one for AMS, so you can keep it simple or go for the full nose, ears and feet colour detail. No supports are needed, which makes it a friendly print if you are just getting started. Once it has cooled, give the joints a gentle wiggle to free them up.
Filament Colour & Material
PLA is recommended. The AMS version looks great in cream with a terracotta brown nose, ears and feet, plus black for the eyes. For single colour, a cream or warm brown works well.
Print Settings
Print in Place
No Supports
Layer Height: 0.16mm
Wall Line Count: 2 or more
Infill: 15%
Line Width: 0.6mm for default, initial layer and outer walls
Profiles: Single Colour and AMS
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: