HeadPhone Holder for IKEA SKADIS (Switchable Logo plates)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphone Holder for IKEA SKADIS with a switchable front plate to display logos. Let me know what else to add!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Headphone Holder for IKEA SKADIS Remix
This bad boy now comes with magnet holes designed for 8x2mm neodymium magnets.
The holes are measured to exactly 8x2.1mm on the Headphone holder, but how is that possible? It won't fit you say?
The star shaped magnet hole carves away enough material to allow the magnet to be press fit and hold without any glue. Or at least that was the case with the 3 printers i tried.
Still no supports required, HOWEVER
The plates are obviously printed face up which means the plates magnet holes need to be bridged over.
So that means if your printer really sucks with overhangs of any kind, you might be f*cked.
If your printer sucks the normal amount at printing overhangs, then you should be fine.
Currently 3 logos available
Let me know what else to do with this