1 / 5
Pogo-pin flashing jig for SoluM ZBS243 e-paper price tags — zdjęcie 1
1 / 5

Pogo-pin flashing jig for SoluM ZBS243 e-paper price tags

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A jig for flashing SoluM e-paper shelf labels (ZBS243, 1.54" and 2.9")

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A jig for flashing SoluM e-paper shelf labels (ZBS243, 1.54" and 2.9") without holding the pins by hand. Drop the tag in, and the pogo pins land on the debug pads.

I made it for [OpenESL](https://github.com/mathiasbk/openESL), open firmware for these tags with an ESP32 access point and an HTTP API. It works with any ZBS243 firmware.

What you need

- Wemos D1 mini (ESP8266) running atc1441's ZBS_Flasher or any other supported flasher boards

- Pogo pins and some wire

Parts

- Bottom: holds the perfboard with the D1 mini, with an opening for USB

- Upper: the pogo pin holder and the tag bed

- Insert: frame for the tag

BOM, wiring notes and photos: https://github.com/mathiasbk/openESL

Tagi