Handheld Recorder Shock Mount (DR-05)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact shock mount for handheld recorders. Fits DR-05 & variants, H1 & variants, as well as most other recorders.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compact shock mount that isolates handheld recorders very well from external vibrations.
Requires 2 rubber bands (approx. 75mm long when stretched slightly), 4x M3x12 bolts, nuts, and washers, and a 1/4-20 nut.
Preferably print out of PETG or better, but will still work from PLA. Arms at 100% infill is recommended since they will be under constant load from the rubber bands.
You might need to adjust the dimensions for the hex nut slots, since your nuts might be a different size than mine (1/4-20 was 10,95mm wide, M3 was 5,35mm wide and 2,25mm thick).