Ender 3 Bondtech BMG Direct Drive Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to turn a bowden tube system driven by a Bondtech BMG Extruder to a direct drive system
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an ender 3, ender 3 v2, ender 3 pro upgrade to turn your bowden tube system into a direct drive system with Bondtech BMG Extruder. This adapter has slots for mounting to the X axis rollers and has slots to grab onto the E-Plate. This mod is compatible with Satsana fan duct and Ender 3 stock fan cover however I have not tested it with stock Ender 3 v2 fan cover so this is not a guaranteed fit.
V2: Changed the orientation of the slot 90 degrees because the torque created by the retractions were making the assembly to go up and cause stringing.
Supports: Yes
Infill: 20% or higher
Material: PLA is fine. I don't recommend PETG due to its flexibility.