Adjustable Phone & Tablet Stand – 3 Angles, Flat Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone and tablet stand from 3 flat parts with 55°, 65° and 75° angle slots and a cable gap. No supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
A sturdy stand for phone or tablet that prints as three flat parts and sets up in seconds – no hinges to fuse, no supports.
- Three fixed angles: put the leg into the front, middle or back slot for 75°, 65° or 55°.
- Locks itself: the back plate sits in a groove, the leg pushes against a stop rib – base, plate and leg form a rigid triangle, nothing slides.
- Front lip with a cable gap, so you can charge while it stands.
- Two sizes: phone (fits devices up to 12 mm thick incl. case) and tablet (up to 14 mm).
- Everything prints flat on the bed – strong, fast, clean surfaces. Disassembles flat for your bag.
Device thickness and angles are parameters in the design.
**Print settings:** PLA, 0,2 mm layers, 3 perimeters, 20 % infill, supports: nein.