1 / 3
Synaptics CoralBoard SL Case – Honeycomb, Fan & VESA 75 (Parametric) — zdjęcie 1
1 / 3

Synaptics CoralBoard SL Case – Honeycomb, Fan & VESA 75 (Parametric)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-part ventilated case for Synaptics CoralBoard SL: honeycomb vents, 30 mm fan option, TPU feet & VESA 75 adapter.

Ocena
0 / 5
Polubienia
9
Pobrania
13
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Synaptics CoralBoard SL Case

A compact, well-ventilated two-part case for the Synaptics CoralBoard SL (73 × 58 mm). All port positions and sizes were taken directly from the board's STL model, ensuring comfortable clearance for every connector.

🔑 Key Features

  • Advanced Ventilation: Honeycomb ventilation in the floor and lid, plus vent slots along the back wall.

  • Screw Locking Assembly: Lid closes with 4 × M3 screws through the board's mounting holes directly into heat-set inserts. Lid bosses clamp the board securely in place—no fragile snap-fits.

  • Removable Top Hatch: Convenient access hatch over the headers, mikroBUS, I3C, CSI, and M.2 area, available with an optional honeycomb pattern and integrated pry notches.

  • Optional Active Cooling: Mount for a 30 × 30 mm exhaust fan directly above the SoC (24 mm hole spacing) with a custom printed grille.

  • Labeled Port Access: Precise openings for USB-A, USB-C (rounded clearance), USER and RESET buttons, microSD (with a large finger funnel), BAT, I2S2, and the 4-pin JST. All ports are engraved with clear labels.

  • Flexible Bottom Options: Choose between push-in TPU feet, M3 holes with a dedicated VESA 75 adapter, or a flat bottom.

  • Fully Parametric OpenSCAD Source: Complete with Customizer menus containing both English and Polish parameter descriptions.

📦 Included Parts & Files

  • Base

  • Lid (standard or fan-supported version)

  • Hatch (solid or honeycomb pattern)

  • TPU Feet (4×)

  • VESA 75 Adapter

  • PDF Assembly Manual (step-by-step PDF guide included in files)

  • Parametric OpenSCAD Source File (.scad)

🔩 Hardware Requirements

  • Enclosure Screws: 4 × M3 countersunk screws (~25 mm without fan, ~30 mm with fan).

  • Heat-Set Inserts: 4 × M3 inserts (~4.6 mm outer diameter, 4–5 mm length).

  • Fan Version: 1 × 30×30×10 mm 5V fan + 4 × M3×8–15 mm screws.

  • VESA Version: 4 × M3×12 mm countersunk screws, 4 × M4 nuts, plus M4 screws matching your VESA mount.

🖨 Recommended Print Settings

  • Case Material: PETG recommended for better heat resistance.

  • Supports: No supports needed—the lid is designed to print face-down.

  • TPU Feet: Print upright using TPU 95A with 100% infill at 15–25 mm/s. Test-print one foot first and adjust foot_hole or head_d in the SCAD file if tight fit adjustment is required.

Tagi