IKEA SKADIS Tilt Bin – Flip-Out Drawer, 4 Sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tilt-out bin for the IKEA SKÅDIS pegboard – opens ~28° and closes by itself.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tip it forward, grab what you need, and it swings back closed by itself. A tilt-out bin for IKEA SKADIS pegboards.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
Opens about 28° and closes by itself
4 sizes
Label field on the front
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Bin Set S/M/L – three sizes with label field
SKADIS Containers – 18 sizes
SKADIS Glue Stick Dispenser – gravity-fed, for 7 and 11 mm sticks
SKADIS Phone & Tablet Shelf – phone or tablet with cable slot
SKADIS Shelf Set – 88, 168 and 248 mm wide
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!
