IKEA SKÅDIS / SKADIS SD, microSD & USB Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack for 8 SD cards, 8 microSD cards and 4 USB sticks for the IKEA SKÅDIS pegboard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All your SD cards, microSD cards and USB sticks in one place, sorted and labelled. A rack for IKEA SKADIS pegboards.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
8 SD cards, 8 microSD cards and 4 USB-A sticks
Labelled sections keep cards for cameras, Raspberry Pi and 3D printers apart
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Cable Comb + Cable Hook – 7 slots plus hook for coiled cables
SKADIS Bin Set S/M/L – three sizes with label field
SKADIS Tilt Bin – flips open, closes by itself
SKADIS Glue Stick Dispenser – gravity-fed, for 7 and 11 mm sticks
SKADIS Shelf Set – 88, 168 and 248 mm wide
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!