Needle Bearing Greasing Tool – 20 mm & 25 mm | Grease Gun Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A practical 3D-printed tool for greasing needle roller bearings using a standard grease gun.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
A practical workshop tool designed to make greasing needle roller bearings easier, faster and more consistent.
This 3D-printed tool allows you to lubricate a needle bearing using a standard grease gun (grease nipple / grease gun coupler attachment).
Simply fit the bearing over the matching tool, connect the grease gun and apply grease. The grease is distributed through the openings around the tool, helping lubricate the bearing across its circumference.
Designed as a simple, reusable solution for workshop maintenance and servicing.
Features
Designed for greasing needle roller bearings
Works with a standard grease gun attachment
Helps distribute grease around the entire bearing
Two size variants: 20 mm and 25 mm
Easy to use and reusable
Simple design with low material consumption
Suitable for workshop and mechanical maintenance
Tested in real-world use
Available sizes
Choose the version that matches the nominal inner diameter of your needle roller bearing:
20 mm version – for bearings with a nominal 20 mm inner diameter
25 mm version – for bearings with a nominal 25 mm inner diameter
Check the dimensions of your bearing before printing.
How to use
Select the tool version matching your bearing size.
Place the needle roller bearing over the tool's central body.
Connect a standard grease gun attachment to the tool's grease inlet.
Apply grease gradually until it is distributed around the bearing.
Remove the bearing and check that the rollers are adequately lubricated.
Avoid excessive pumping pressure. Keep the bearing and tool securely positioned during greasing, and follow the grease gun manufacturer's safety instructions.
Recommended print settings
These settings have been tested and work well with this model.
Material: PETG or PLA
Layer height: 0.20 mm
Perimeters / wall loops: 3
Infill: 10–15% Gyroid
Supports: Check the slicer preview and use the supplied print orientation
High infill is unnecessary for this tool. Three perimeters and 10–15% Gyroid infill provide a practical balance between strength, material usage and print time.
Both PLA and PETG are suitable for typical workshop use. Choose a material appropriate for the grease, temperature and operating conditions involved.
Files included
Two size variants are provided, with both file formats available:
20 mm – STL and 3MF
25 mm – STL and 3MF
STL files provide the model geometry for your preferred slicer. The 3MF files offer convenient model import and print preparation.
Designed and tested as a practical tool for maintaining needle roller bearings.