Maltese Cross Decor - Shelf or Wall, Minimal Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
200 mm Maltese cross with a carved border and inner cross. Slim stand or wall keyhole, 1 or 2 colours, no supports.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
A bold Maltese cross to put on a shelf, a desk or the wall. It is 200 mm wide and 6 mm thick, with the classic flared arms, a carved border that follows the whole outline, and an inner cross with flared ends recessed into the face. One piece, printed flat, no supports.
Two ways to show it
On a minimal stand. The cross drops into a slim stand and leans back 8 degrees. The front lip is only 3 mm tall, so it covers nothing of the design. Pick the low ledge (120 mm) or two small feet (26 mm each) that almost disappear under the cross.
On the wall. The wall version has a keyhole slot on the back. Hang it on one screw or nail with a head up to 8 mm; it drops into place and sits flat against the wall.
The cross itself has no tab or slot: the stand does all the holding.
One colour or two
One colour: the carved border and the recessed inner cross catch the light on their own. Red, black, gold or silk filaments all look great.
Red and white: the inner cross is a white inlay 1.4 mm thick, so you get the classic red cross with a white cross inside.
Files
Maltese_Cross_200mm.stl: the cross, one colour.
Maltese_Cross_200mm_two_color_RED.stl + _WHITE.stl: load both at once and answer "Yes" to "multi-part object" in PrusaSlicer or Orca, then set the white part to your second filament.
Maltese_Cross_200mm_wall_keyhole.stl: the cross with the keyhole on the back.
Stand_ledge.stl, Stand_foot_left.stl, Stand_foot_right.stl: print the ledge or the two feet.
Maltese_Cross_200mm_X2D_4_plates.3mf: Bambu Studio project with all 4 plates (cross 2h41 / 94 g, red and white 2h53 / 91 g + 7 g, stands 46 min / 29 g, wall 2h42 / 95 g on the X2D).
Printing tips
PLA, 0.2 mm layers, 3 walls, 15% infill. No supports, no brim.
Print the cross face up, flat on the bed. The first two layers are slightly inset so the bottom edge stays clean.
The slot in the stand is 6.4 mm for the 6 mm cross (0.2 mm clearance per side). If your printer runs tight, a few passes of sandpaper inside the slot are enough.
Sizes
Cross: 200 x 200 x 6 mm. Fits any printer with a 250 mm class bed.
Ledge stand: 120 x 39 x 14.4 mm. Feet: 26 x 39 x 14.4 mm each.
If you print one, please post a Make with a photo of it on your shelf or wall. A Like helps me keep making free models. Thank you!
NEW - Bambu Lab H3C: Maltese_Cross_200mm_4_plates_H3C.3mf puts each colour on its own PrintTool (almost no purge), re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.