1 / 6
Adjustable Roof Fascia Mounts for 32mm Recessed LED Deck/Step Lights — zdjęcie 1
1 / 6

Adjustable Roof Fascia Mounts for 32mm Recessed LED Deck/Step Lights

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjustable 3D-printable roof fascia mounts for 32mm outdoor LED lights. Rotate, glue, and screw into place!

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

 Custom 3D-printable mounting brackets designed to easily install popular low-voltage recessed LED lights onto exterior roof fascia, eaves, or overhangs. Perfect for adding clean architectural accent lighting, patio illumination, or shed soffit lighting.  

Features

Adjustable Pitch: The light housing can be rotated to your desired angle to direct the beam exactly where you want it to shine.

Clean Installation: Mounts flush directly to roof fascia boards.  

Secure Fit: The 32mm LED light pucks are designed for a tight friction/press-fit into the assembly.

Hardware & Parts Needed

LED Lights: Compatible with standard 32mm recessed outdoor LED light kits (such as the SMY Lighting 12V low-voltage kits widely available on Amazon—see reference photo).  

Fasteners: 6 x 1-inch drywall screws (or appropriate exterior wood screws) for mounting the bracket to the fascia.  

Adhesive: A drop of super glue or adhesive once you lock in your preferred rotation angle to permanently set the pitch.

Print Settings & Recommendations

Material: ASA or ABS is strongly recommended for outdoor UV and weather resistance. PETG is a great alternative.

Perimeters/Walls: 3 to 4 walls for added structural strength.

Infill: 20% to 40% (Grid, Gyroid, or Cubic).

Tagi