Adjustable Roof Fascia Mounts for 32mm Recessed LED Deck/Step Lights
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable 3D-printable roof fascia mounts for 32mm outdoor LED lights. Rotate, glue, and screw into place!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Custom 3D-printable mounting brackets designed to easily install popular low-voltage recessed LED lights onto exterior roof fascia, eaves, or overhangs. Perfect for adding clean architectural accent lighting, patio illumination, or shed soffit lighting.
Features
Adjustable Pitch: The light housing can be rotated to your desired angle to direct the beam exactly where you want it to shine.
Clean Installation: Mounts flush directly to roof fascia boards.
Secure Fit: The 32mm LED light pucks are designed for a tight friction/press-fit into the assembly.
Hardware & Parts Needed
LED Lights: Compatible with standard 32mm recessed outdoor LED light kits (such as the SMY Lighting 12V low-voltage kits widely available on Amazon—see reference photo).
Fasteners: 6 x 1-inch drywall screws (or appropriate exterior wood screws) for mounting the bracket to the fascia.
Adhesive: A drop of super glue or adhesive once you lock in your preferred rotation angle to permanently set the pitch.
Print Settings & Recommendations
Material: ASA or ABS is strongly recommended for outdoor UV and weather resistance. PETG is a great alternative.
Perimeters/Walls: 3 to 4 walls for added structural strength.
Infill: 20% to 40% (Grid, Gyroid, or Cubic).